What is a USB Driver?
A USB (Universal Serial Bus) driver establishes and supports the communication between an upstream host controller (usually your computer) and a downstream device such as a:
- Digital Stethoscope
- Other peripheral device.
Previously, each device that users wanted to connect to their computer had either its own port requirement (i.e. printers) or came with it’s own PC card (i.e. modems) that had to fit into the user’s tower.
This quickly became a major issue requiring resolution as space for these ports and cards rapidly ran out. A meeting of the minds across several industries and manufacturers led to the development of the USB port and accompanying drivers. The USB port and driver can replace a large number of serial and parallel ports and is supported by the computer operating system. Overall it provides a standardized way to connect and communicate with different types of devices.
What can go wrong with my USB Driver(s)?
If you are experiencing problems with the operation of devices connected to your USB port, its most likely due to one of the factors listed below:
- The USB driver has become outdated and causes conflicts with hardware devices connected to the USB port.
- The computer operating system has been upgraded. Note: This is especially true for the release of Windows 7 when a new USB communication protocol was implemented and is known as USB 2.0.
- The USB driver has been corrupted during a system crash or malware infection that has compromised system security and deleted or infected files.
How do I resolve USB Driver problems?
There is sometimes an issue where the USB port has not sensed the device you’ve connected and a system re-boot is needed for the device to be ‘found.’
Obsolete USB drivers can also be an issue and result in a high share of the errors found with USB operation. On a Windows system you can update your driver by following these steps:
- Click Start/Control Panel/ System.
- Click the Hardware tab, and then Device Manager.
- Click Universal Serial Bus controllers
- Click to highlight and select the USB component to be updated.
- Eko uses Bluegiga Bluetooth Low Energy (COM3) USB dongles.
- Right click on the highlighted selection and choose Update Driver Software from the dropdown menu.
- Follow the instructions from the Update Driver Software Wizard to update USB drivers.